Installing The Sfp Transceiver - Planet IGS-10020 Series User Manual

2.3.1 Installing the SFP Transceiver

The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the Industrial
Managed Switch as Figure 2-25

Approved PLANET SFP Transceivers
PLANET Industrial Managed Switch supports 100/1000 dual mode with both single mode and multi-mode SFP
transceivers. The following list of approved PLANET SFP transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100BASE-X SFP)
Speed (Mbps)
Model
MFB-FX 100
MFB-F20 100
MFB-F40 100
MFB-F60 100
MFB-F120 100
MFB-TFX 100
MFB-TF20 100
appears.
Figure 2-25: Plug in the SFP Transceiver
Connector
Fiber Mode
Interface
LC Multi Mode
LC Single Mode
LC Single Mode
LC Single Mode
LC Single Mode
LC Multi Mode
LC Single Mode
Distance Wavelength (nm)
2km 1310nm
20km 1310nm
40km 1310nm
60km 1310nm
120km 1550nm
2km 1310nm
20km 1550nm
57
User's Manual
Operating Temp.
0 ~ 60 degrees C
0 ~ 60 degrees C
0 ~ 60 degrees C
0 ~ 60 degrees C
0 ~ 60 degrees C
-40 ~ 75 degrees C
-40 ~ 75 degrees C