4.2.17 Fault Alarm
This page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen in
appears.
The page includes the following fields:
Object
• Enable
• Record
• Action
• Power Alarm
• Port Alarm
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-2-19: Fault Alarm Control Configuration page Screenshot
Description
Controls whether Fault Alarm is enabled on this switch.
Controls whether Record is sending System log or SNMP Trap or both.
Controls whether Port Fail or Power Fail or both for fault detecting.
Controls whether AC, DC1 or DC2 or both for fault detecting.
Controls which Ports or all for fault detecting.
98
User's Manual
Figure 4-2-19