1. Package Contents Thank you for purchasing PLANET Industrial M12 Managed Ethernet Switch. “Industrial Managed Switch” is used as an alternative name in this Quick Installation Guide. Open the box of the Industrial Managed Switch and carefully unpack it. The box should contain the following items:...
Ring INPUT IP67 Mgt. IGS-604HPT-M12 DC 48-56V Figure 2-2: IGS-604HPT-M12 Front Panel 2.3 LED Indicators System Color Function PWR 1 Green Lights to indicate DC power input 1 has power. PWR 2 Green Lights to indicate DC power input 2 has power.
Per 10/100/1000BASE-T PoE+ Port (Port 3~6) Color Function To indicate the port is running in 10/10/1000Mbps Lights speed and successfully established. LNK/ACT Green To indicate the switch is actively sending or Blinks receiving data over that port. To indicate the port is providing 45~55 V DC Lights in-line power.
Page 7
M12 A-code RJ45 connector Male Connector T568B Color 1000BASE-T Signal ID Pin No. Pin No. BI_DA+ white/orange BI_DA- orange BI_DB+ white/green BI_DC+ blue BI_DC- white/blue BI_DB- green BI_DD+ white/brown BI_DD- brown As each Ethernet port of the Industrial Managed Switch is running in auto negotiation mode, make sure the Ethernet ports of the corresponding Ethernet devices are also running in auto negotiation Note...
2.6 M12 DC Power Connector Pin Assignment The front panel of the Industrial Managed Switch provides one M12 A-coded 5-pin male connector for dual DC power input. INPUT DC 48-56V 2.7 M12 DC Power Cable Wiring Please use the power cable with the M12 A-coded 5-pin female connector from the Industrial Managed Switch package for DC power input.
3. Connecting M12 Cable to the IGS-604HPT-M12 Step 1: Turn counterclockwise to remove the waterproof screw nuts of an M12 connector and power input. Step 2: Insert the M12 UTP male connector into the M12 female Gigabit Ethernet port of the Industrial Managed Switch.
Page 10
Step 4: Insert the M12 power female connector into the M12 male port of the power input. Step 5: Turn clockwise to tighten the screw nut of the M12 power connector. Before connecting the DC power cord, please check whether your local DC power source is stable.
4. Switch Management 4.1 Requirements Workstations running Windows XP/2003/Vista/7/8/10/2008, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP Protocols. Workstations are installed with Ethernet NIC (Network Interface Card) Ethernet Port Connection Network cables -- Use standard network (UTP) cables with RJ45 connectors. ...
4.3 Logging in the Industrial Managed Switch 1. Use Internet Explorer 8.0 or above Web browser and enter IP address http://192.168.0.100 (default IP address) to access the Web interface. 2. When the following dialog box appears, please enter the default user name and password “admin”.
The Switch Menu on the left of the Web page lets you access all the commands and statistics the Industrial Managed Switch provides. Figure 4-3: Switch Menu If you are not familiar with Switch functions or the related param- eter, press “Help icon” anytime on the Web page to get the help description.
Page 14
To save all applied changes and set the current configuration as a startup configuration, the startup-configuration file will be loaded automatically across a system reboot. 1. Click System, Save Startup Config. 2. Press the “Save Configuration” button.
5. Recovering Back to Default Configuration IP address has been changed or admin password has been forgotten – 1. Power off the Industrial Managed Switch and remove all the existing connec- tions. 2. Use the straight RJ45 cable to connect to port 1 and port 2 in the loop topology as shown below: 3.