Table of Contents
Advertisement
• Topology Flag
• Topology Change Last
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
4.7.4 CIST Port Configuration
This page allows the user to inspect the current STP CIST port configurations, and possibly change them as well. The CIST Port
Configuration screen in
Figure 4-7-6
The page includes the following fields:
Object
•
Port
•
STP Enabled
•
Path Cost
The current state of the Topology Change Flag for this Bridge instance.
The time since last Topology Change occurred.
appears.
Figure 4-7-6 : STP CIST Port Configuration page Screenshot
Description
The switch port number of the logical STP port.
Controls whether RSTP is enabled on this switch port.
Controls the path cost incurred by the port. The Auto setting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
171
User's Manual
Advertisement
Table of Contents
