VETRON 5300 Instruction Book page 55

NR. PARAMETER
» START BACKTACK
B Stitch length
125
126 AB Speed
NR. PARAMETER
» IN THE SEAM
Stitch counted seam track
130
Free sewing, Free sewing,
normal seam normal seam
135 Bobbin thread counter
DESCRIPTION
You can choose between:
= Stitch length for B in backtack same as length set in parameter 010
STD
(main stitch length).
4.0 mm = Stitch length for B in backtack can be choosen irrespective of the
main stitch length (parameter 010) (e.g. 4.0 mm).
-4.0 mm = When the stitch length for B in backtack is entered in the minus
range this part of the backtack will done in reverse.
You can choose between:
PEDAL = The speed for sewing the backtack will be regulated with the foot pedal.
800 S/min = You can select a speed of 50 – 2000 S/min.
DESCRIPTION
You can choose between:
OFF = The seam is done manually. Free sewing, normal seam.
1 – 20.000 = Stitch counted seam. The seam will be ended automatically
when the entered amount of stitches is done (e.g. 30 stitches).
You can choose between:
OFF = The bobbin thread counter is switched o .
50 – 20.000 = You can enter the amount of back counting stitches here
(max. 20.000 stitches).
INFO!
The red LED in the safety switch (X Key) will flash when the entered
amount of back counting stitches has been reached. The machine will
continue work until the next thread cut. The machine is blocked after the
thread cut and on the display you will see the request to change the
bobbin. After changing the bobbin you have to press the safety switch (X
Key) to reset the bobbin thread counter.
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
-12-14
07/2020
53