VETRON 5300 Instruction Book page 13

WARNING!
Work on safety devices must only be carried out by trained personnel!
1 2
SAFETY CYLINDER
» The safety cylinder
NOTE:
If the cylinder is longer (max 310mm), the machine is moved further back.
That means the machine is safer and more stable in this position.
» If the machine is tilted back, the safety spring
ween the table top and the spring must be at least 5mm (Picture 2).
The distance can be adjusted on the cylinder by turning the fork head
enough, the cylinder carrier
HOW TO MOUNT THE SAFETY CYLINDER
» Screw the cylinder carrier
The distance between the edge of the machine cutout and the cylinder carrier
(minimum 203mm).
» The distance between the cylinder carrier
NOTE:
The position of the safety cylinder is important for the stability of the machine. This must be
checked when the machine is received.
CRUSHING
Crushing and bruising due to tilting the machine
For di erent adjustments, the safety cylinder should be unhooked.
Caution is advised, when returning the sewing machine to its original position.
After work, reattach the safety cylinder
07. MOUNTING SAFETY DEVICES FOR TILTING (CYLINDER)
3
5mm
1
:
1
should be approx. 304mm to 310mm long.
3
must be readjusted. (Picture 3)
4
4
under the table.
4
and the edge of the machine cutout is 280mm.
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
01. PREFACE
280mm
must be locked securely. The distance bet-
in or out. If this is not
2
1 :
4
205mm
4
is 205mm
07/2020
11