Maximum Rotation Speed - VETRON 5300 Instruction Book

» SEWING PARAMETER
100 thread clamp
110 stitch in stitch
120 backtack or condensed
stitches at seam start
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126 A/B speed
Automatic tension adjustment when material thickness changes
Thread tension
in %
70
60
50
40
30
20
10
NR. PARAMETER
» THREAD TENSION
2 tension level when
nd
038
switched to 2 nd stroke
039 Release tension on foot lift
NR. PARAMETER
»

MAXIMUM ROTATION SPEED

040 Speed mode
010 stitch length 1
020 foot stroke 1
030 thread tension A 1
032 thread tension B 1
041 speed
050 foot pressure
070 foot lift height
135 bobbin thread counter
060 edge value
066 Edge guide hight
DESCRIPTION
Two functions are available.
Function 1 = OFF Thread tension will not change over.
Function 2 = ON Thread tension will change over.
Three functions are available.
Function 1 = OFF (No tension release when foot is lifted)
Function 2 = END (Tension release when thread is cut)
Function 3 = ALWAYS (Tension release when foot is lifted)
DESCRIPTION
You can chose between two versions:
Function 1 = PEDAL Sewing speed will be regulated by the posititon of the pedal.
Function 2 = CONSTANT Constant sewing speed as selected in parameter 041.
05. PROGRAMMING
074 foot position on stop
077 needle position on stop
021 foot stroke 2
027 automatic stroke switch
according to sewing speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
031 thread tension A 2
033 thread tension B 2
034 thread tension based
on material thickness
038 2 tension level when
nd
switched to 2
054 dynamic foot pressure
Thread tension
rise
2 mm
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
04. PROGRAM PARAMETER
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
140 backtack or condensed
stitches at seam end
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
145 D stitch length
nd stroke
146 C/D speed
4 mm
Material thickness mm
07/2020
-4-14
45