Table of Contents
Advertisement
03. OPERATION OF THE MACHINE
1
CAUTION! RISK OF INJURY!
Push the X-button at the machine head, the red light illuminates showing the active
"BLOCKED MODE", or turn the machine o before you change the sewing feet.
Failure to comply produces a risk of injury in case of an unintentional machine
operation.
During „BLOCKED MODE" the sewing feet have no pressure or position control.
They can be moved by the following method:
01. Press and hold the programmable button on the machine head (lowest button).
02. By turning the JOG KEY the sewing feet can be moved.
03. By loosening screws
NOTICE!
Push the X-button or switch the machine on again and follow the instructions
displayed on the control panel.
1
the sewing feet can be exchanged.
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
02. SEWING FEET EXCHANGE
07/2020
27
Advertisement
Table of Contents
