Start Backtack - VETRON 5300 Instruction Book

05. PROGRAMMING
04. PROGRAM PARAMETER
-11-14
» SEWING PARAMETER
100 thread clamp
110 stitch in stitch
120 backtack or condensed
stitches at seam start
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126 A/B speed
NR. PARAMETER
»

START BACKTACK

Backtack or condensed stitches
at seam start
120
A stitch count
121
B stitch count
122
123 AB repetition
A stitch length
124
07/2020
52
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
010 stitch length 1
020 foot stroke 1
030 thread tension A 1
032 thread tension B 1
041 speed
050 foot pressure
070 foot lift height
135 bobbin thread counter
060 edge value
066 Edge guide hight
DESCRIPTION
You can choose between:
OFF
STCONDS
BACKTACK
BACKTACK B = Backtack with distance A and B and A.
Can be set from 0 to 100 stitches.
Can be set from 0 to 100 stitches.
Can be set from 0 to 100 stitches.
Repeats the start backtack depending on adjustment.
You can choose between:
STD
4.0 mm
-4.0 mm
074 foot position on stop
077 needle position on stop
021 foot stroke 2
027 automatic stroke switch
according to sewing speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
031 thread tension A 2
033 thread tension B 2
034 thread tension based
on material thickness
038 2 tension level when
nd
switched to 2
054 dynamic foot pressure
= No backtack at seam start.
= Condensed stitches at seam start. The distance A will be used
for the condensed stitches. The stitch length will be set with
parameter 124 (Distance B is suppressed).
= Backtack with distance A and B.
Use/Advantage: for di erent backtack length to stitch length.
= Stitch length for A in backtack same as length set in parameter
010 (Main stitch length).
= Stitch length for A in backtack can be choosen irrespective of the
main stitch length (parameter 010) (e.g. 4.0 mm).
= When the stitch length for A in backtack is entered in the minus
range this part of the backtack will be done in reverse.
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
140 backtack or condensed
stitches at seam end
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
stroke
nd 145 D stitch length
146 C/D speed