GE
DRAFT
DIRECTION 5775469, R
3.) Install the Self-Adhesive Hook and Loop set on the TRAY PEDESTAL CABINET PLASTIC BT16.
Refer to the figure below.
4.) Remove the Paper and place the TRAY PEDESTAL CABINET PLASTIC on the System Pedestal.
Refer to the figure below.
Figure 8-35 Removing the Paper and placing the TRAY PEDESTAL CABINET PLASTIC BT16
3
DRAFT (J
EVISION
Stick the self-adhesive hook and loop set on the TRAY
PEDESTAL CABINET PLASTIC BT16. Align it with the locator
pillars and stick at center.
Figure 8-34 Installing the Self-Adhesive Hook and Loop set
Place the TRAY PEDESTAL CABINET PLASTIC BT16
on the system pedestal.
Chapter 8 - Replacement Procedures
19, 2018)
ULY
V
™ P8/V
OLUSON
OLUSON
B
S
M
ASIC
ERVICE
ANUAL
™P6
8-33