GE
RAFT
DIRECTION 5775469, R
e.) If desired, click the Save to USB button to save the USB unlock key to a connected USB
f.) Click the Start encryption button.
NOTE:
The process of enabling encryption of the patient data will take a consideralbe amount of time (one to
several hours).
g.) Confirm the dialogs with Yes and OK to start encryption.
NOTE:
The system should not be used while encryption process is ongoing.
3-8-1-11-2
Unlock an encrypted Disk
If patient data stored on the internal HDDs D:\partition are encrypted (protected), following dialog
window appears as soon as the system is started.
The system has to be unlocked by one of the following possibilities:
•
Enter the previously defined user Password (minimum of 8 characters) and click Unlock.
•
Click the Recovery key button, enter the key into the displayed dialog and click Unlock.
•
Connect the USB device with unlock key and click Unlock.
If the USB device with unlock key is connected to your Voluson P-series, the system is automatically
NOTICE
unlocked during boot up.
3-62
3
DRAFT (J
EVISION
device.
A progress bar is displayed during disk encryption process.
Figure 3-59 Unlock screen at encrypted disk
Section 3-8 - System Configuration
19, 2018)
ULY
V
™ P8/V
OLUSON
OLUSON
B
S
M
ASIC
ERVICE
ANUAL
™P6