GE Voluson P8 Basic Service Manual page 181

GE DRAFT
DIRECTION 5775469, R
4-5-4 Load Full System Configuration (Full Backup)
9.) Click the NEXT button and then select YES to start, or NO to cancel the restore procedure.
After restoring the data, the Voluson™ P8/Voluson™P6 reboots and the application starts again.
10.)Confirm that the date and time are set correctly
4-5-5 Delete Full System Configuration (Full Backup)
1.) Press the F2 key on the control panel.
2.) In the "Utilities" menu select SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select BACKUP and then click the
4.) Click the DELETE button of the "Full System Configuration" group.
5.) Choose the Destination.
6.) Click on the backup to be deleted (additional information is displayed in the table).
7.) Select the DELETE button.
There is no " UNDO" function for this action!
WARNING WARNING
!! WARNING:
3 DRAFT (J
EVISION
Figure 4-22 Start Restore Backup now?
Figure 4-23 System Configuration Delete
Chapter 4 - Functional Checks
19, 2018)
ULY
V ™ P8/V
OLUSON OLUSON
B S
ASIC ERVICE
tab.
SYSTEM CONFIGURATION
Choose Destination
Select Backup
Click [Delete]
™P6
M
ANUAL
4-21