Customizing An Existing Wlan Profile - GE Voluson P8 Basic Service Manual

GE RAFT
DIRECTION 5775469, R
3-12-2-7

Customizing an existing WLAN Profile

1.) Press the "Utilities" key on the control console.
2.) On the right side of the screen select Connectivity and then click the Device Setup tab.
3.) Click the WLAN Configuration button; see
4.) The Wireless Network Configuration tool with available Wireless Networks appear.
5.) Select the Security tab and then click Customize.
6.) Customize the following information:
-
-
-
-
-
-
7.) After you have filled in all the required information, click OK.
3-76
3 DRAFT (J
EVISION
Figure 3-67 Security - Customize
Network Name(SSID)
Check box " Connect even if Network is not Broadcasting its Name (SSID)"
network Authentication (Open, Shared key, WPA PSK or WPA2 PSK)
Date Encryption
Network Key
Key Index
Section 3-12 - Network Configuration
19, 2018)
ULY
Section Figure 3-64 on page 3-71
V ™ P8/V
OLUSON OLUSON
B S M
ASIC ERVICE ANUAL
™P6