Installing The Deskjet Color Printer Directly Via An Usb-Cable - GE Voluson P8 Basic Service Manual

GE RAFT
DIRECTION 5775469, R
23.)Finally click on Finish
24.)Assign the printer to the remote keys P1, P2 and/or P3
25.)Assign the printer as Report Printer
26.)Close app open windows, select Save & Exit and restart the system (turn off and on the system).
3-7-4

Installing the Deskjet Color Printer directly via an USB-cable

1.) Power off/Shutdown the system as described in:
2.) Connect the printer according to connection scheme:
3.) Power On/Boot Up the system as described in
All software drivers are pre-installed for the designated printer only.
4.) Verify correct printer settings;
5.) Assign the printer to the remote keys P1, P2, P3; see
page 3-53
6.) Assign the printer as Report Printer, see
3-38
3 DRAFT (J
EVISION
Section 3-7 - Printer Installation
19, 2018)
ULY
Section 3-6-3 on page
Section 3-6-2 on page 3-25
Section 3-7-7 "Adjustment of Printer Settings" on page 3-49
Section 3-7-8 "Remote Control Selection" on
V ™ P8/V
OLUSON OLUSON
B S M
ASIC ERVICE ANUAL
3-28.
™P6