GE Voluson P8 Basic Service Manual page 165

GE DRAFT
DIRECTION 5775469, R
5.) After complete power down, unscrew the 2 screws and remove the pull-out protection to disconnect
the main power cable from the system or unplug it from the AC wall outlet socket.
Figure 4-4 Circuit Breaker, pull-out protection and main power cable at rear of system
6.) Press on the brakes to block the front caster wheels.
7.) Disconnect probes.
DO NOT disconnect a probe while running (Live Scan "Write" mode)!
CAUTION
A software error may occur. In this case switch the unit OFF (perform a reset).
!! CAUTION:
3 DRAFT (J
EVISION
Chapter 4 - Functional Checks
19, 2018)
ULY
Circuit breaker
Pull-out Protection
2 screws
Main power cable
V ™ P8/V
OLUSON OLUSON
B S M
ASIC ERVICE ANUAL
™P6
4-5