Table of Contents
Advertisement
Settings
Degree of soiling
You can select the default setting for
the degree of soiling or switch off the
degree of soiling query.
Options
– Default setting
You can choose between the Light,
Normal or Heavy degree of soiling
settings.
Factory default setting: Normal.
– Query
You can switch the degree of soiling
query on or off.
Factory default setting: On
Buzzer volume
You can select one of seven different
settings for the buzzer volume.
The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.
102
Keypad tone
Each touch of a sensor or press of a
button is confirmed with an audible
tone.
Factory default setting: the keypad tone
is switched on.
Total consumption
In this setting you can check the
saved energy and water consumption
values.
Options
– Display
Shows the sum of the energy and the
sum of the water used by the
previous programmes.
– Reset function
The energy consumption and water
consumption totals are reset to zero.
Advertisement
Table of Contents
