Table of Contents
Advertisement
TSC1 SA Torque Speed Control
Torque Speed Control 1 (TSC1) is the speed control signal from the SGC to the ECU. For known protocols, the SGC uses the
expected source address when TSC1 SA is -1 (default value). You can configure the controller for a specific source address (the
range is 0 to 255). Ask the engine manufacturer to verify the TSC1 source address.
13.7 Wiring
More information
See the Installation chapter for more information about wiring.
USER MANUAL 4189341243A UK
Page 65 of 78
Advertisement
Table of Contents
