13.5 Engine communication settings
Use the DEIF Smart Connect software to configure engine communication in the SGC controller.
Open DEIF Smart Connect and connect to the SGC controller, then select Start > Engine > Engine Control unit (ECU) for the
engine communication settings window.
No.
Function
1
Select the engine type from the drop-down list.
2
Select types of measurements from the engine/ECU.
3
Configure the settings for the ECU communication failure alarm.
Configure the settings for the diagnostic lamps on the ECU
•
Amber lamp
•
Red lamp
4
•
Malfunction lamp
•
Protect lamp
See the specific documentation for the engine/ECU for more information.
Select the actions that SGC controls for the engine/ECU
•
Engine speed
5
•
Engine start/stop
•
Engine preheat
Configure source addresses for the SGC controller and the engine/ECU.
6
See the specific documentation for the engine/ECU for information about the source address.
USER MANUAL 4189341243A UK
Page 63 of 78