Counter Inputs; Figure 15: Connecting Example, Switching Contact At Counter Input Di1 - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-316 TO-PASS® Mobile, 4 AI, Web, MODBUS
5.2.2

Counter Inputs

Only connect SELV/PELV voltages!
Only SELV/PELV voltages shall be connected to the device terminals.
Connect shielding!
Shielded cables are recommended for the counter inputs.
When using shielded cables, the shield must be routed to the grounded DIN rail
(see Section "Connections" > "Shielding").

Figure 15: Connecting example, switching contact at counter input DI1

Manual
Version 2.0.0
Connect Devices 39