Addresses; Figure 23: Configuring The Addresses - WAGO -TO-PASS 761 Manual

Telecontrol module for fault detection/indication, position monitoring and remote control to-pass mobile, 4 ai, web, modbus
Hide thumbs Also See for WAGO-TO-PASS 761:
Table of Contents

Advertisement

WAGO-TO-PASS® 761
761-316 TO-PASS® Mobile, 4 AI, Web, MODBUS
7.4

Addresses

The TO-PASS
transmitters/receivers via GSM. Messages are sent by the TO-PASS
module as SMS; however, they can also be sent as an e-mail, fax or voice mail, as
defined in configuration.
The TO-PASS
address.
Select the TO-PASS
and the option Addresses.
The input fields for the addresses are on the right side:

Figure 23: Configuring the addresses

Manual
Version 2.0.0
®
telecontrol module can communicate with a maximum of four
®
telecontrol module can also transmit messages to an Internet
®
telecontrol module to be configured from the project tree
Parameterizing
53
®
telecontrol

Advertisement

Table of Contents
loading

This manual is also suitable for:

761-316

Table of Contents