Diagnostics Via Process Image - WAGO 750-508/040-000 Manual

40 Diagnostics
7.2

Diagnostics via Process Image

The process image (see Section "Process Image") provides information on cases
of error.
Bit 0 of the input bits contains diagnostic information for output DO 1, bit 1
contains diagnostic information for output DO 2.
It is normal operation if the respective input bit is set to 0. If the respective input
bit is set to 1, it points to an error at the output concerned.
Manual
Version 1.3.0
WAGO-I/O-SYSTEM 750 XTR
750-508/040-000 2DO 24 VDC 2A/ Diagn XTR