Renaming Trilink - Fourier TriLink User Manual

5. Enter your password (the default password is 1234)
6. Click OK
MultiLab searches for Bluetooth devices and displays a list with all the devices that
were found
7. Click the name of the TriLink you want to connect to, then click Pair
Note: TriLink briefly display its name after turning it on
After pairing is done MultiLab displays the name of the paired TriLink.
8. Click OK
You are now ready to begin data logging.
From now on MultiLab will automatically connect to the paired TriLink.
2.

Renaming TriLink

1. Click Logger on the menu bar, then click Bluetooth Setup
2. Click Rename TriLink
3. Enter your password (the default password is 1234)
80 Chapter 4 Working with a desktop computer