Programming Trilink; Set Up Trilink - Fourier TriLink User Manual

2.8. Programming TriLink

2.8.1.

Set up TriLink

1. Establish connection between TriLink and Palm
2. Tap Setup
3. If you are working in Auto Detect Mode (the default mode, see if the
check box is checked) MultiLab displays the connected sensors,
otherwise pick the sensors for each input from the sensors' pick list
4. Tap the Rate tab and select number of samples per time unit from
the Rate pick list
5. Tap the Samples tab and select the total number of samples from
the Samples' pick list
on the main toolbar
Chapter 2 Working with Palm Handheld 41