Fourier TriLink User Manual page 55

Note: If MultiLab does not find a TriLink, it prompts to a message saying
that TriLink was not found. Make sure that the TriLink is on. If no
TriLink is connected you can still work offline and open stored data
files.
2. If you are working in Auto Detect Mode (the default mode, see if the
check box is checked) MultiLab displays the connected sensors,
otherwise pick the sensors for each input from the sensors pick list
3. Tap the Rate tab and select number of samples per time unit from
the Rate pick list
4. Tap the Samples tab and select the total number of samples from
the Samples pick list
54 Chapter 3 Working with Pocket PC