Meter Types - Fourier TriLink User Manual

If you switch to meter mode without running TriLink (i.e. without taping Run ),
TriLink continuously takes measurements from all active sensors, MultiLab displays it
but the data is not stored.
You can display one meter at a time. To select what sensor to display pick it from the
sensors pick list located above the meter
To collect and store data while viewing it in Meter display, simply tap Run .
2.

Meter types

There are three meter types: Analog , Digital and Bar .
To select a meter type, tap the corresponding icon on the meter toolbar below the
meter
36 Chapter 2 Working with Palm Handheld