Ph Temperature Compensation; Multilab Sensor Calibration; Factory Calibration (No Calibration Required) - Fourier TriLink User Manual

Fourier trilink data loggers: user guide

Table of Contents

1.3.3.

pH Temperature Compensation

To compensate a pH sensor for temperature changes, plug the temperature sensor

into Input 1, and the pH sensor in Input 2. TriLink will then display the compensated

pH value.

1.3.4.

The sensors can also be calibrated using the Calibrate Sensors option in MultiLab's

Logger menu. Please refer to section 4.6.6 for more on this.

1.3.5.

All digital sensors that are essentially "timers" leave the factory fully calibrated, and

do not suffer from any accuracy degradation. An example of such a sensor is the

Sonic Ranger Distance sensor, which measures the time passed from the

transmission of a sound pulse to its echo reception.

Chapter 1 TriLink

Table of Contents

Do you have a question about the TriLink and is the answer not in the manual?

Multilab