Select Display - Fourier TriLink User Manual

Note: If MultiLab does not find a TriLink, it prompts a message saying
that no TriLink was found. Check the connection between the
TriLink and the Palm. If no TriLink is connected you can still work
offline and open stored data files.
2. If you are working in Auto Detect Mode (the default mode, see if the
check box is checked) MultiLab displays the connected sensors,
otherwise pick the sensors for each input from the sensors pick list
3. Tap the Rate tab and select number of samples per time unit from
the Rate pick list
4. Tap the Samples tab and select the total number of samples from
the Samples pick list
5. Tap OK

4.Select display

Tap a display on the main toolbar:
Graph , Table
Note: If you begin collecting data from the opening screen MultiLab
prompts a graph view
or Meter
Chapter 2 Working with Palm Handheld 27