Wlan Security Settings - Moxa Technologies AirWorks AWK-1137C Series User Manual

AirWorks AWK-1137C UM
Setting
5 GHz
A
A/N Mixed
N Only (5 GHz)
Channel width (for any 11N RF type only)
Setting
20 MHz
20/40 MHz
Channel bonding
Channel bonding shows the channel used by the AP if Channel width is set to 20/40 MHz.
SSID
Setting
Max. of 31 characters

WLAN Security Settings

The AWK-1137C provides four standardized wireless security modes: Open, WEP (Wired Equivalent Privacy),
WPA (Wi-Fi Protected Access), and WPA2. Several security modes are available in the AWK-1137C by
selecting Security mode and WPA type:
Open: No authentication, no data encryption.
•
• WEP: Static WEP (Wired Equivalent Privacy) keys must be configured manually.
• WPA/WPA2-Personal: Also known as WPA/WPA2-PSK. You will need to specify the Pre-Shared Key in the
Passphrase field, which will be used by the TKIP or AES engine as a master key to generate keys that
actually encrypt outgoing packets and decrypt incoming packets.
• WPA/WPA2-Enterprise: Also called WPA/WPA2-EAP (Extensible Authentication Protocol). In addition to
device-based authentication, WPA/WPA2-Enterprise enables user-based authentication via IEEE 802.1X.
The AWK-1137C can support three EAP methods: EAP-TLS, EAP-TTLS, and EAP-PEAP.
Security mode
Setting
Open
WEP
WPA
WPA2
Description
Only supports the IEEE 802.11a standard
Supports IEEE 802.11a/n standards, but 802.11n may operate
at a slower speed if 802.11a clients are on the network
Only supports the 5 GHz IEEE 802.11n standard
Description
Select your channel width, If you are not sure which option to
use, select 20/ 40 MHz (Auto)
Description
The SSID of a client and the SSID of the AP must be identical for
the client and AP to be able to communicate with each other.
NOTE: An SSID cannot contain the following characters:
` ' " | ; &
Description
No authentication
Static WEP is used
WPA is used
Fully supports IEEE 802.11i with "TKIP/AES + 802.1X"
3-18
Web Console Configuration
Factory Default
Factory Default
20 MHz
Factory Default
MOXA
Factory Default
Open