Wlan Certificate Settings (For Eap-Tls In Client/Client-Router/Slave Mode Only) - Moxa Technologies AirWorks AWK-1137C Series User Manual

AirWorks AWK-1137C UM
MAC clone
Setting
Enable/Disable
• MAC clone interface: Determine the MAC address of which LAN-port-connected equipment that the AWK
client should copy.
WLAN Certificate Settings (for EAP-TLS in
Client/Client-router/Slave mode only)
When EAP-TLS is used, a WLAN Certificate will be required at the client end to support WPA/WPA2-Enterprise.
The AWK-1137C can support the PKCS #12, also known as Personal Information Exchange Syntax Standard,
certificate formats that define file formats commonly used to store private keys with accompanying public key
certificates, protected with a password-based symmetric key.
Current status displays information for the current WLAN certificate, which has been imported into the
AWK-1137C. Nothing will be shown if a certificate is not available.
Certificate issued to: Shows the certificate user
Certificate issued by: Shows the certificate issuer
Certificate expiration date: Indicates when the certificate has expired
You can import a new WLAN certificate in Import WLAN Certificate by following these steps, in order:
1. Input the corresponding password (or key) in the Certificate private password field and then click
Submit to set the password.
2. The password will be displayed in the Certificate private password field. Click on the Browse button in
Select certificate/key file and select the certificate file.
Description
Enabling this feature allows the AWK client to copy the MAC
address of LAN connected equipment as its own. This
overcomes the limitation of the IP-Bridged behavior in a
MAC-sensitive network (MAC-based communication or
MAC-authenticated network). Limitation: Only ONE device is
allowed to connect to the AWK client while this feature is
enabled.
3-26
Web Console Configuration
Factory Default
Disable