AirWorks AWK-1137C UM
If the node and access path are available, you will see that all packets were successfully transmitted with no
loss. Otherwise, some, or even all, packets may get lost, as shown in the following figure.
Firmware Upgrade
The AWK-1137C can be enhanced with more value-added functions by installing firmware upgrades. The latest
firmware is available at Moxa's download center.
Before running a firmware upgrade, make sure the AWK-1137C is off-line. Click the Browse button to specify
the firmware image file and click Firmware Upgrade and Restart to start the firmware upgrade. After the
progress bar reaches 100%, the AWK-1137C will reboot itself.
When upgrading your firmware, the AWK-1137C's other functions are forbidden.
ATTENTION
Please make sure the power source is stable when you upgrade your firmware. An unexpected power breakup
may damage your AWK-1137C.
Configuration Import and Export
You can use the Configuration Import & Export page to back up or restore the following:
•
Configuration settings on the AWK-1137C
•
MIB
In the Configuration Import section, click Choose File to select a configuration file and click Import
Configuration button to begin importing configuration settings. The password is up to 31 characters.
To save the configuration file to a storage media, click Export Configuration. The configuration file is a text
file and you can view and edit it with a general text-editing tool.
Click Export MIB to save the MIB file to a storage media. The configuration file is a *.my file that you can
import using a general SNMP tool and use to remotely control or configure the AWK-1137C.
3-68
Web Console Configuration