Dip Switch Settings; Output Power - Moxa Technologies INJ-24A Series Hardware Installation Manual

DIP Switch Settings

DIP Switch
1
2
3
4
The default setting for each DIP switch is OFF.
The following table explains the effect of
setting the DIP switches to the ON positions.
Setting
802.3af (ON)
802.3af/at
(OFF)
Hi PWR (ON)
Std. PoE
(OFF)
4-pair (ON)
2-pair (OFF)
Mode A (ON)
Mode B
(OFF)
Description
The INJ-24A is forced to
802.3af mode and only accepts
IEEE 802.3af standard devices.
The INJ-24A automatically
detects the standard, for both
IEEE 802.3af and IEEE 802.3at
standard devices.
The INJ-24A is set to support
high power output.
The INJ-24A only provides
standard PoE power output.
The INJ-24A provides power via
both data pair (pin 1, 2, 3, and
6) and phantom pair (pin 4, 5,
7, and 8).
The INJ-24A provides power via
data pair or spare pair.
The INJ-24A provides power via
data pair (pins 1, 2, 3, and 6).
The INJ-24A provides power via
spare pair (pins 4, 5, 7, and 8).
- 8 -
Max
Output
Power
15.4 watts
Std PoE: 30
watts
Hi PWR:
36 watts
36 watts
802.3af:
15.4 watts
802.3af/at:
30 watts
60 watts
See DIP
Switch 1
and 2
See DIP
Switch 1
and 2
See DIP
Switch 1
and 2