Moxa Technologies AirWorks AWK-1137C Series User Manual page 35

AirWorks AWK-1137C UM
WPA/WPA2-Enterprise
When used as a client, the AWK-1137C can support three EAP methods (or EAP protocols): EAP-TLS,
EAP-TTLS, and EAP-PEAP, corresponding to WPA/WPA-Enterprise settings on the AP side.
Encryption method
Setting
TKIP**
AES
**This option is only available with 802.11a/b/g standard.
EAP protocol
Setting
TLS
TTLS
PEAP
Before choosing the EAP protocol for your WPA/WPA2-Enterpise settings on the client end, please contact the
network administrator to make sure the system supports the protocol on the AP end. Detailed information on
these three popular EAP protocols is presented in the following sections.
EAP-TLS
TLS is the standards-based successor to Secure Socket Layer (SSL). It can establish a trusted communication
channel over a distrusted network. TLS provides mutual authentication through certificate exchange. EAP-TLS
is also secure to use. You are required to submit a digital certificate to the authentication server for validation,
but the authentication server must also supply a certificate.
You can use Basic WLAN Setup  WLAN Certificate Settings to import your WLAN certificate and enable
EAP-TLS on the client end.
Description
Temporal Key Integrity Protocol is enabled
Advance Encryption System is enabled
Description
Specifies Transport Layer Security protocol
Specifies Tunneled Transport Layer Security
Specifies Protected Extensible Authentication Protocol, or
Protected EAP
3-21
Web Console Configuration
Factory Default
TKIP
Factory Default
TLS