Setting The Ip Address; Static Or Dynamic Ip; Factory Default Settings - Moxa Technologies ioMirror E3210 User Manual

ioMirror E3210 User's Manual
DO
Alarm Output

Setting the IP Address

Static or Dynamic IP

The ioMirror E3210 supports both static and dynamic IP addresses. You may need to consult with
your network administrator to determine how IP addresses are assigned in your network
environment:
For a static IP environment, you can enter a specific IP address using ioMirrorAdmin or the
web console.
In a dynamic IP environment (BOOTP or DHCP), you can use ioMirrorAdmin or the web
console to specify the DHCP, DHCP/BOOTP, or BOOTP server that will assign the ioMirror's
IP address.

Factory Default Settings

The factory default network settings are as follows:
IP address: 192.168.127.254
Netmask: 255.255.255.0
Gateway: None
2-3
Hardware Installation