Dhcp Server (For Client-Router Mode Only) - Moxa Technologies AirWorks AWK-1137C Series User Manual

AirWorks AWK-1137C UM
Port PVID
Setting
VLAN ID ranging from 1
to 4094
VLAN Tagged
Setting
A comma-separated list
of VLAN IDs. Each of
the VLAN IDs range
from 1 to 4094.
NOTE
The VLAN feature can allow wireless clients to manage the AP. If the VLAN Management ID matches a VLAN ID,
then those wireless clients who are members of that VLAN will have management access to the AP.
CAUTION: Once a VLAN Management ID is configured and is equivalent to one of the VLAN IDs on the AP, all
members of that User VLAN will have management access to the AP. Be careful to restrict VLAN membership
to those with legitimate access to the AP.

DHCP Server (for Client-Router mode only)

DHCP (Dynamic Host Configuration Protocol) is a networking protocol that allows administrators to assign
temporary IP addresses to network computers by "leasing" an IP address to a user for a limited amount of time,
instead of assigning permanent IP addresses.
The AWK-1137C can act as a simplified DHCP server and easily assign IP addresses to your DHCP clients by
responding to the DHCP requests from the client ends. The IP-related parameters you set on this page will also
be sent to the client.
You can also assign a static IP address to a specific client by entering its MAC address. The AWK-1137C
provides a Static DHCP mapping list with up to 16 entities. Be reminded to check the Active check box for
each entity to activate the setting.
You can check the IP assignment status under Status  DHCP Client List.
Description
Set the port's VLAN ID for devices that connect to the port. The
port can be a LAN port or WLAN ports.
Description
Specify which VLANs can communicate with this specific VLAN. (Empty)
3-48
Web Console Configuration
Factory Default
1
Factory Default