Trap - Moxa Technologies AirWorks AWK-1137C Series User Manual

AirWorks AWK-1137C UM
To E-mail address 1/ 2/ 3/ 4
Setting
Max. 63 characters

Trap

Traps can be used to signal abnormal conditions (notifications) to a management station. This trap-driven
notification can make your network more efficient.
Because a management station usually takes care of a large number of devices that have a large number of
objects, it will be overloading for the management station to poll or send requests to query every object on
every device. It would be better if the managed device agent could notify the management station by sending
a message known as a trap for the event.
Trap Event Types
SNMP Trap Receiver Settings
SNMP traps are defined in SMIv1 MIBs (SNMPv1) and SMIv2 MIBs (SNMPv2c). The two styles are basically
equivalent, and it is possible to convert between the two. You can set the parameters for SNMP trap receivers
through the web page.
1st / 2nd trap version
Setting
V1
V2
1st / 2nd trap server IP/name
Setting
IP address or host
name
Description
Enter the receivers' e-mail addresses.
Description
SNMP trap defined in SNMPv1
SNMP trap defined in SNMPv2
Description
Enter the IP address or name of the trap server used by your
network.
3-61
Web Console Configuration
Factory Default
None
Factory Default
V1
Factory Default
None