Fortinet FortiGate FortiGate-1000 Administration Manual page 84

Fortinet fortigate fortigate-1000: user guide
Hide thumbs Also See for FortiGate FortiGate-1000:
Table of Contents

Advertisement

HA
HA
84
To select a language for the web-based manager
1
Go to System > Config > Options.
2
From the Languages list, select a language for the web-based manager to use.
3
Select Apply.
Note: You should select the language that the management computer operating system uses.
To set PIN protection for the LCD panel
1
Go to System > Config > Options.
2
In the LCD Panel section, select the PIN Protection check box.
3
Type a 6-digit PIN.
4
Select Apply.
To modify the dead gateway detection settings
Modify dead gateway detection to control how the FortiGate unit confirms connectivity
with a ping server added to an interface configuration. For information about adding a
ping server to an interface, see
1
Go to System > Config > Options.
2
For Detection Interval, type a number in seconds to specify how often the FortiGate
unit tests the connection to the ping target.
3
For Fail-over Detection, type a number of times that the connection test fails before
the FortiGate unit assumes that the gateway is no longer functioning.
4
Select Apply.
Fortinet achieves high availability (HA) using redundant hardware and the FortiGate
Clustering Protocol (FGCP). Each FortiGate unit in an HA cluster enforces the same
overall security policy and shares the same configuration settings. You can add up to
32 FortiGate units to an HA cluster. Each FortiGate unit in an HA cluster must be the
same model and must be running the same FortiOS firmware image.
The FortiGate units in the cluster use cluster ethernet interfaces to communicate
cluster session information, synchronize the cluster configuration, synchronize the
cluster routing table, and report individual cluster member status. The units in the
cluster are constantly communicating HA status information to make sure that the
cluster is operating properly. This communication is called the HA heartbeat.
FortiGate HA supports link failover, device failover, and HA heartbeat failover.
"To add a ping server to an interface" on page
01-28006-0009-20041105
System config
56.
Fortinet Inc.

Advertisement

Table of Contents
loading

Table of Contents