Fortinet FortiGate FortiGate-1000 Administration Manual page 180

CLI configuration
180
config neighbor
edit <id_integer>
show
end
Note: Only the ip keyword is required. All other keywords are optional.
neighbor command keywords and variables
Keywords and
variables
cost
<cost_integer>
ip <address_ipv4>
poll-interval
<seconds_integer>
priority
<priority_integer>
Example
This example shows how to manually add a neighbor.
config router ospf
config neighbor
end
This example shows how to display the settings for neighbor 1.
config router ospf
config neighbor
get
end
This example shows how to display the configuration for neighbor 1.
config router ospf
config neighbor
show
end
01-28006-0009-20041105
Description
Enter the cost to use for this neighbor. The
valid range for cost_integer is 1 to
65535.
Enter the IP address of the neighbor.
Enter the time, in seconds, between hello
packets sent to the neighbor in the down
state. The value of the poll interval must be
larger than the value of the hello interval.
The valid range for seconds_integer is 1
to 65535.
Enter a priority number for the neighbor.
The valid range for priority_integer is
0 to 255.
edit 1
set ip 192.168.21.63
end
edit 1
edit 1
Router
Default Availability
All models.
10
0.0.0.0 All models.
All models.
10
All models.
1
Fortinet Inc.