Transparent Mode Vlan List; Transparent Mode Vlan Settings - Fortinet FortiGate FortiGate-1000 Administration Manual

System network

Transparent mode VLAN list

Transparent mode VLAN settings

FortiGate-1000 Administration Guide
In Transparent mode, go to System > Network > Interface to add VLAN
subinterfaces.
Figure 18: Sample Transparent mode VLAN list
Create New Select Create New to add a VLAN subinterface to a FortiGate interface.
Virtual Domain Select a virtual domain to display the VLAN interfaces added to this virtual
domain.
Name The name of the interface or VLAN subinterface.
Access The administrative access configuration for the interface. See
administrative access to an interface" on page 56
administrative access options.
Status The administrative status for the interface.
If the administrative status is a green arrow, the interface is up and can accept
network traffic. If the administrative status is a red arrow, the interface is
administratively down and cannot accept traffic. To change the administrative
status, see
and "To start up an interface that is administratively down" on page
Delete icon. Select to delete a VLAN subinterface.
View/Edit icon. Select to view or edit an interface or VLAN subinterface.
VLAN settings displays the current configuration of a selected FortiGate interface or
VLAN subinterface. Use VLAN settings to configure a new VLAN subinterface or to
change the configuration of a FortiGate interface or VLAN subinterface.
Figure 19: VLAN settings
See "Interface settings" on page 48
01-28006-0009-20041105
"To bring down an interface that is administratively up" on page 54
for descriptions of all VLAN settings.
VLANs in Transparent mode
"To control
for information about
54.
69