Reverting To A Previous Firmware Version - Fortinet FortiGate FortiGate-1000 Administration Manual
Fortinet fortigate fortigate-1000: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000:
- Install manual (66 pages) ,
- Installation manual (56 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
System status
Reverting to a previous firmware version
FortiGate-1000 Administration Guide
The FortiGate unit uploads the firmware image file, upgrades to the new firmware
version, and restarts. This process takes a few minutes.
7
Reconnect to the CLI.
8
To confirm that the new firmware image is successfully installed, enter:
get system status
9
Use the procedure
antivirus and attack definitions, or from the CLI, enter:
execute update_now
Use the following procedures to revert your FortiGate unit to a previous firmware
version.
Reverting to a previous firmware version using the web-based
manager
The following procedures revert the FortiGate unit to its factory default configuration
and deletes IPS custom signatures, web content lists, email filtering lists, and changes
to replacement messages.
Before beginning this procedure you can:
•
Back up the FortiGate unit configuration.
•
Back up the IPS custom signatures.
•
Back up web content and email filtering lists.
For information, see
If you are reverting to a previous FortiOS version (for example, reverting from FortiOS
v2.80 to FortiOS v2.50), you might not be able to restore the previous configuration
from the backup configuration file.
Note: Installing firmware replaces the current antivirus and attack definitions with the definitions
included with the firmware release that you are installing. After you install new firmware, use the
procedure
"To update antivirus and attack definitions" on page 123
and attack definitions are up to date.
To revert to a previous firmware version using the web-based manager
1
Copy the firmware image file to the management computer.
2
Log into the FortiGate web-based manager.
Note: To use this procedure you must login using the admin administrator account, or an
administrator account that has system configuration read and write privileges.
3
Go to System > Status.
4
Under Unit Information > Firmware Version, select Update.
5
Type the path and filename of the firmware image file, or select Browse and locate the
file.
"To update antivirus and attack definitions" on page 123
"Backing up and Restoring" on page
01-28006-0009-20041105
Changing the FortiGate firmware
to update
118.
to make sure that antivirus
35
Advertisement
Table of Contents
