Get Router Info Rip; Config Router Ospf - Fortinet FortiGate FortiGate-1000 Administration Manual

CLI configuration

get router info rip

config router ospf

166
Use this command to display information about RIP.
Command syntax
get router info rip {database | interface}
router info rip command keywords and variables
Keywords and variables Description
database
interface
Examples
get router info rip database
get router info rip interface
Use this command to configure open shortest path first (OSPF) on the FortiGate unit.
OSPF is an open protocol based on the shortest path first algorithm. OSPF is a link
state protocol capable of routing larger networks than the simpler distance vector RIP
protocol. An OSPF autonomous system (AS) or routing domain is a group of areas
connected to a backbone area. A router connected to more than one area is an area
border router (ABR). Routing information is contained in a link state database. Routing
information is communicated between routers using link state advertisements (LSAs).
More information on OSPF can be found in RFC 2328.
Command syntax pattern
config router ospf
set <keyword> <variable>
end
config router ospf
unset <keyword>
end
get router ospf
show router ospf
The config router ospf command has 7 subcommands.
config area
config distribute-list
config neighbor
config network
config ospf-interface
config redistribute
01-28006-0009-20041105
Show the entries in the RIP routing database.
Show the status of the FortiGate interfaces and
whether RIP is enabled for each interface.
Router
Availability
All models.
All models.
Fortinet Inc.