Configuring Custom Services - Fortinet FortiGate FortiGate-1000 Administration Manual
Fortinet fortigate fortigate-1000: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000:
- Install manual (66 pages) ,
- Installation manual (56 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Service
Configuring custom services
210
Name
Protocol Type
Protocol Number The IP protocol number for the service.
To add a custom TCP or UDP service
1
Go to Firewall > Service > Custom.
2
Select Create New.
3
Enter a name for the new custom TCP or UDP service.
4
Select TCP or UDP as the Protocol Type.
5
Specify Source and Destination Port number ranges for the service by entering the
low and high port numbers. If the service uses one port number, enter this number in
both the low and high fields.
6
Select OK.
You can now add this custom service to a policy.
To add a custom ICMP service
1
Go to Firewall > Service > Custom.
2
Select Create New.
3
Enter a name for the new custom ICMP service.
4
Select ICMP as the Protocol Type.
5
Enter the ICMP type number and code number for the service.
6
Select OK.
You can now add this custom service to a policy.
To add a custom IP service
1
Go to Firewall > Service > Custom.
2
Select Create New.
3
Enter a name for the new custom IP service.
4
Select IP as the Protocol Type.
5
Enter the IP protocol number for the service.
6
Select OK.
You can now add this custom service to a policy.
To delete a custom service
1
Go to Firewall > Service > Custom.
2
Select the Delete icon beside the service you want to delete.
3
Select OK.
The name of the IP custom service.
Select the protocol type of the service you are adding: IP.
01-28006-0009-20041105
Firewall
Fortinet Inc.
Advertisement
Table of Contents
