Configuring Routing For A Virtual Domain; Configuring Firewall Policies For A Virtual Domain - Fortinet FortiGate FortiGate-1000 Administration Manual

Configuring virtual domains

Configuring routing for a virtual domain

Configuring firewall policies for a virtual domain

140
4 Select OK.
5 Go to System > Network > Zone.
6 Select Create new.
See "Zone" on page
domain.
To configure routing for a virtual domain in NAT/Route mode
1 Go to System > Virtual domain > Virtual domains.
2 Select Change following the current virtual domain name above the table.
3 Choose the virtual domain for which to configure routing.
4 Select OK.
5 Go to Router.
6 Configure routing for the current virtual domain as required.
See "Router" on page
by the routing configuration for the current virtual domain.
To configure the routing table for a virtual domain in Transparent mode
1 Go to System > Virtual domain > Virtual domains.
2 Select Change following the current virtual domain name above the table.
3 Choose the virtual domain for which to configure routing.
4 Select OK.
5 Go to System > Network > Routing Table.
6 Configure the routing table for the current virtual domain as required.
See "Routing table (Transparent Mode)" on page
virtual domain is routed only by the static routes added to the current virtual domain.
To add firewall policies to a virtual domain
The following procedure applies to NAT/Route and Transparent mode.
1 Go to System > Virtual domain > Virtual domains.
2 Select Change following the current virtual domain name above the table.
3 Choose the virtual domain for which to configure firewall policies.
4 Select OK.
5 Go to Firewall > Policy.
57. Any zones that you add are added to the current virtual
143. Network traffic entering this virtual domain is routed only
01-28006-0009-20041105
System virtual domain
61. Network traffic entering this
Fortinet Inc.