Category Block Reports Options; Generating A Category Block Report; Category Block Cli Configuration - Fortinet FortiGate FortiGate-1000 Administration Manual
Fortinet fortigate fortigate-1000: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000:
- Install manual (66 pages) ,
- Installation manual (56 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Category block reports options
Category block reports options
Generating a category block report
Category block CLI configuration
334
The following table describes the options for generating reports:
Profile
Select the profile for which you want to generate a report.
Report Type
Select the time frame for which you want to generate the report. Choose
from hour, day, or all historical statistics.
Report Range
Select the time range (24 hour clock) or day range (from six days ago to
today) for which you want the report. For example, if you select report type
hour and enter the range 13 – 16 you will get a category block report for 1
pm to 4 pm today. If you select report type day and enter range 0 – 3 you will
get a category block report for 3 days ago to today.
Get Report
Select Get Report to generate the report.
The following table describes the features of a generated report:
Category
The category for which the statistic was generated.
Allowed
The number of allowed web addresses accessed in the selected time frame.
Blocked
The number of blocked web addresses accessed in the selected time frame.
Monitored
The number of monitored web addresses accessed in the selected time
frame.
To generate a category block report
1
Go to Web filter > Category block.
2
Select Reports.
3
Select a profile for which to generate the report.
4
Select a report type.
5
Enter a report range.
6
Select Get Report.
The report is generated, including a pie chart and a list of web pages blocked by
category.
Use the ftgd_hostname keyword for the webfilter catblock command if you
ever need to change the default hostname (URL) for the FortiGuard Service Point.
The FortiGuard Service Point name cannot be changed using the web-based
manager. You can configure all the FortiGuard settings using from the CLI. See the
FortiGate CLI Reference Guide for descriptions of all webfilter catblock
keywords.
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
01-28006-0068-20041105
Web filter
Fortinet Inc.
Advertisement
Table of Contents
