Fortinet FortiGate FortiGate-1000 Administration Manual page 105

System config
FortiGate-1000 Administration Guide
Table 15: HA MIB fields
MIB field Description
groupId HA group ID.
priority The clustering priority of the individual FortiGate unit in a cluster.
override The master-override setting (enable or disable) for an individual FortiGate unit in
a cluster.
autoSync Auto config synchronization flag.
schedule Load balancing schedule for A-A mode.
stats Statistics for all of the units in the HA cluster.
index
serial
cpuUsage
memUsage The current FortiGate unit memory usage (in MB).
netUsage
sesCount
pktCount
byteCount
idsCount
avCount
Table 16: Administrator accounts
MIB field Description
index The index number of the administrator account added to the FortiGate unit.
name The user name of an administrator account added to the FortiGate unit.
addr Up to three trusted host IP addresses for the administrator account.
mask Up to three trusted host netmasks for the administrator account.
perm The access profile assigned to the account.
Table 17: Local users
MIB field Description
index The index number of the local user added to the FortiGate unit.
name The user name of the local user added to the FortiGate unit.
auth The authentication type of for the local user. Can be password, LDAP, or
RADIUS.
state Whether the local user is enabled or disable.
01-28006-0009-20041105
The index number of the FortiGate unit.
The FortiGate unit serial number.
The current FortiGate unit CPU usage as a percent.
The current FortiGate unit network utilization (in Mbps).
The number of active sessions being processed by the FortiGate
unit.
The number of packets processed by the FortiGate unit.
The number of bytes processed by the FortiGate unit
The number of attacks detected by the IPS running on the
FortiGate unit in the last 20 hours.
The number of viruses detected by the antivirus system running
on the FortiGate unit in the last 20 hours.
SNMP
105