Fortinet FortiGate FortiGate-1000 Administration Manual page 172

CLI configuration
172
This example shows how to display the configuration for area 15.1.1.1.
config router ospf
config area
show
end
config filter-list
Access the config filter-list subcommand using the config area
subcommand.
Use filter lists to control the import and export of LSAs into and out of an area. You can
use access or prefix lists for OSPF area filter lists. For more information, see
list" on page 156 and "Prefix list" on page
config filter-list command syntax pattern
config filter-list
edit <id_integer>
set <keyword> <variable>
end
config filter-list
edit <id_integer>
unset <keyword>
end
config filter-list
delete <id_integer>
end
config filter-list
edit <id_integer>
get
end
config filter-list
edit <id_integer>
show
end
Note: Both keywords are required.
filter-list command keywords and variables
Keywords and Description
variables
Set the direction for the filter. Enter in to filter
direction
incoming packets. Enter out to filter outgoing
{in | out}
packets.
Enter the name of the access list or prefix list to use
list
for this filter list.
<name_str>
01-28006-0009-20041105
edit 15.1.1.1
157.
Router
"Access
Default Availability
All models.
out
No All models.
default.
Fortinet Inc.