Dhcp Exclude Range Settings; Ip/Mac Binding - Fortinet FortiGate FortiGate-1000 Administration Manual

IP/MAC binding

DHCP exclude range settings

IP/MAC binding
78
The range cannot exceed 65536 IP addresses.
Figure 25: Exclude range settings
Starting IP
Ending IP
To add an exclusion range
1 Go to System > DHCP > Exclude Range.
2 Select Create New.
3 Add the starting IP and ending IP.
4 Select OK to save the exclusion range.
If you have added DHCP servers, you can use DHCP IP/MAC binding to reserve an
IP address for a particular device on the network according to the MAC address of the
device. When you add the MAC address and an IP address to the IP/MAC binding list,
the DHCP server always assigns this IP address to the MAC address. IP/MAC binding
pairs apply to all FortiGate DHCP servers.
Figure 26: IP/MAC binding list
Create New Select Create New to add a DHCP IP/MAC binding pair.
Name The name for the IP and MAC address pair.
IP Address The IP address for the IP and MAC address pair. The IP address must be
within the configured IP range.
MAC Address The MAC address of the device.
Delete icon. Delete an IP/MAC binding pair.
Edit/View icon. View or modify an IP/MAC binding pair.
Enter the starting IP of an exclude range.
Enter the ending IP of an exclude range.
01-28006-0009-20041105
System DHCP
Fortinet Inc.