Configuring Web Category Filtering Options - Fortinet FortiGate FortiGate-1000 Administration Manual

Firewall
FortiGate-1000 Administration Guide

Configuring web category filtering options

Figure 108:Protection profile web category filtering options (FortiGuard)
The following options are available for web category filtering through the protection
profile. See "Category block" on page 331
options.
Enable category block (HTTP
only)
Block unrated websites
(HTTP only)
Provide details for blocked
HTTP 4xx and 5xx errors
(HTTP only)
Allow websites when a rating
error occurs (HTTP only)
Category
01-28006-0009-20041105
for more category blocking configuration
Enable FortiGuard category blocking.
Block any web pages that have not been rated by the web
filtering service.
Display a replacement message for 4xx and 5xx HTTP errors.
If the error is allowed through then malicious or objectionable
sites could use these common error pages to circumvent web
category blocking.
Allow web pages that return a rating error from the web
filtering service.
The FortiGuard web filtering service provides many categories
by which to filter web traffic. You can set the action to take on
web pages for each category. Choose from allow, block, or
monitor.
Protection profile
227