Fortinet FortiGate FortiGate-1000 Administration Manual page 178

CLI configuration
178
Use this command to use an access list to filter the networks in routing updates.
Routes not matched by any of the distribute lists will not be advertised.
You must configure the access list that you want the distribute list to use before you
configure the distribute list. For more information on configuring access lists, see
"Access list" on page 156.
config distribute-list command syntax pattern
config distribute-list
edit <id_integer>
set <keyword> <variable>
end
config distribute-list
edit <id_integer>
unset <keyword>
end
config distribute-list
delete <id_integer>
end
config distribute-list
edit <id_integer>
get
end
config distribute-list
edit <id_integer>
show
end
Note: Both keywords are required.
distribute-list command keywords and variables
Keywords and Description
variables
Enter the name of the access list to use for
access-list
this distribute list.
<name_str>
Advertise only the routes discovered by the
protocol
specified protocol and that are permitted by
{connected | rip
the named access list.
| static}
Example
This example shows how to configure a distribute list numbered 2 to use an access
list named acc_list1 for all static routes.
01-28006-0009-20041105
Router
Default Availability
No default. All models.
All models.
connected
Fortinet Inc.