Cli Configuration; Fortilog Setting - Fortinet FortiGate FortiGate-1000 Administration Manual

Fortinet fortigate fortigate-1000: user guide
Hide thumbs Also See for FortiGate FortiGate-1000:
Table of Contents

Advertisement

CLI configuration

CLI configuration

fortilog setting

366
This guide only covers Command Line Interface (CLI) commands and command
keywords that are not represented in the web-based manager. For complete
descriptions of working with CLI commands see the FortiGate CLI Reference Guide.
Note: The command keywords for fortilog setting that are not represented in the web-
based manager are localid and psksecret.
Use this command to configure log settings for logging to a FortiLog unit.
The FortiLog unit is a log analyzer and manager that can combine the log information
from various FortiGate units.
Command syntax pattern
config log fortilog setting
set <keyword> <variable>
config log fortilog setting
unset <keyword>
get log fortilog setting
show log fortilog setting
log fortilog setting command keywords and variables
Keywords and
variables
encrypt
{enable | disable}
localid <str_id>
psksecret
<str_psk>
server
<address_ipv4>
status
{disable | enable}
Note: The IPSec VPN settings for the FortiGate unit must match the VPN settings on the
FortiLog unit.
01-28006-0009-20041105
Description
Enter enable to enable encrypted
communication with the FortiLog unit.
Enter the local ID for an IPSec VPN tunnel
to a FortiLog unit. You can create an IPSec
VPN tunnel if one or more FortiGate units
are sending log messages to a FortiLog
unit across the Internet. Using an IPSec
VPN tunnel means that all log messages
sent by the FortiGate are encrypted and
secure.
Enter the pre-shared key for the IPSec
VPN tunnel to a FortiLog unit. You can
create an IPSec VPN tunnel if one or more
FortiGate units are sending log messages
to a FortiLog unit across the Internet. Using
an IPSec VPN tunnel means that all log
messages sent by the FortiGate are
encrypted and secure.
Enter the IP address of the FortiLog unit.
Enter enable to enable logging to a
FortiLog unit.
Log & Report
Default
Availability
disable
All models.
No
All models.
default.
No
All models.
default.
No
All models.
default.
disable All models.
Fortinet Inc.

Advertisement

Table of Contents
loading

Table of Contents