Fortigate Traps - Fortinet FortiGate FortiGate-1000 Administration Manual

SNMP

FortiGate traps

102
Table 6: FortiGate MIBs
MIB file name or RFC Description
fortinet.trap.2.80.mib The Fortinet trap MIB is a proprietary MIB that is required for your
RFC-1213 (MIB II)
RFC-2665 (Ethernet-
like MIB)
The FortiGate agent can send traps to SNMP managers that you have added to
SNMP communities. For SNMP managers to receive traps, you must load and
compile the Fortinet trap MIB (file name fortinet.trap.2.80.mib) onto the SNMP
manager.
All traps include the trap message as well as the FortiGate unit serial number.
Table 7: Generic FortiGate traps
Trap message
ColdStart
WarmStart
LinkUp
LinkDown
01-28006-0009-20041105
SNMP manager to receive traps from the FortiGate SNMP agent. For
more information about FortiGate traps, see
page 102.
The FortiGate SNMP agent supports MIB II groups with the following
exceptions.
No support for the EGP group from MIB II (RFC 1213, section 3.11
and 6.10).
Protocol statistics returned for MIB II groups (IP/ICMP/TCP/UDP/etc.)
do not accurately capture all FortiGate traffic activity. More accurate
information can be obtained from the information reported by the
Fortinet MIB.
The FortiGate SNMP agent supports Ethernet-like MIB information
with the following exception.
No support for the dot3Tests and dot3Errors groups.
Description
Standard traps as described in RFC 1215.
System config
"FortiGate traps" on
Fortinet Inc.